 |
icc hofmann - Ingenieurbüro für technische Informatik Am Stockborn 16, 60439 Frankfurt/M, FRG Tel.: +49 6082-910101 Fax.: +49 6082-910200 E-Mail: info@icc-hofmann.net |
|
(1) Searching for "2025030701202762637" in Archived Documents Library (TED-ADL)
Ausschreibung: Deutschland Absperrventile Radiation hard Vacuum Valves with small conductance for SFRS - DEU-Darmstadt
Absperrventile
Dokument Nr...: 149507-2025 (ID: 2025030701202762637)
Veröffentlicht: 07.03.2025
*
DEU-Darmstadt: Deutschland Absperrventile Radiation hard Vacuum Valves
with small conductance for SFRS
2025/S 47/2025 149507
Deutschland Absperrventile Radiation hard Vacuum Valves with small conductance for SFRS
OJ S 47/2025 07/03/2025
Auftrags- oder Konzessionsbekanntmachung Standardregelung
Lieferungen
1. Beschaffer
1.1. Beschaffer
Offizielle Bezeichnung: FAIR - Facility for Antiproton and Ion Research in Europe GmbH
E-Mail: proekf33@gsi.de
Rechtsform des Erwerbers: Von einer zentralen Regierungsbehörde kontrolliertes öffentliches
Unternehmen
Tätigkeit des öffentlichen Auftraggebers: Bildung
2. Verfahren
2.1. Verfahren
Titel: Radiation hard Vacuum Valves with small conductance for SFRS
Beschreibung: With the FAIR project (Facility for Antiproton and Ion Research), a state-of-the-
art particle accelerator and experimental facility for basic and applied research is being
realized in cooperation with 16 partner countries at the GSI Helmholtzzentrum für
Schwerionenforschung GmbH (GSI) site in Darmstadt. As part of the tender, 6 different types
of elastomer sealed vacuum valves are to be procured. They differ in their nominal sizes
(DN16, DN25 & DN40), flange types (CF or ISO-KF) and actuator (manual or electro-
pneumatic). In addition, these valves must be resistant to radiation up to a defined level.
These different valve types are used in nine different applications.
Kennung des Verfahrens: 00311f07-c532-4d5a-9806-de52e71277b5
Interne Kennung: 33/2600025074FAIR
Verfahrensart: Offenes Verfahren
Das Verfahren wird beschleunigt: nein
2.1.1. Zweck
Art des Auftrags: Lieferungen
Haupteinstufung (cpv): 42131148 Absperrventile
2.1.2. Erfüllungsort
Postanschrift: Planckstr. 1
Stadt: Darmstadt
Postleitzahl: 64291
Land, Gliederung (NUTS): Darmstadt, Kreisfreie Stadt (DE711)
Land: Deutschland
2.1.4. Allgemeine Informationen
Zusätzliche Informationen: Bekanntmachungs-ID: CXS0YYEYTHAENW8E The only form of
submission of tender (offer) accepted by Awarding Authority is in writing, electronically Note: In
Writing, Electronically tender (offer) shall be submitted electronically within the deadline via the
German awarding platform DTVP. URL: http://www.dtvp.de/Center/ The forms and other
documents to be completed, provided by FAIR, may be - either completed on the online
tendering tool under the section Documents to Be Completed or - created and compiled
separately by Candidate together with the other components of the participation application or
offer (concepts or explanations etc.), then uploaded under the heading Own Documents .
However, Candidates should not fill in the forms online and upload them again separately, as
this can result in transmission errors and increases the workload on both sides. In order to
comply with the text form (in writing) according to § 126b BGB [transl.: German Civil Code]
when submitting participation applications, Candidates must provide the following information:
- In the case of natural persons, the full name (first name and surname) must be given (name
of the declaring person in the participation application form). - In the case of legal entities and
commercial companies and corporations, the name of the company and its legal form must be
stated. In addition, the full name of the employee who is submitting the participation
application on behalf of the company (name of the declaring person in the participation
application form) must be stated. The insertion of a company logo is not sufficient. - In the
case of Bidding Consortia, the declaring person according to § 126b BGB shall be the
employee of the leading member who submits the participation application on behalf of the
Bidding Consortium; besides, the form Bidding Consortium Declaration must be submitted. It
should be noted that in the case of electronic submission, the text form according to § 126b
BGB is only observed if the participation applications are transmitted in encrypted form via the
awarding platform (cf. information on eVergabe). Submitting the tender (offer) via email is not
sufficient. In the case of incorrect/ incomplete information that violates the aforementioned
formal requirements, tender (offer) will be excluded unless Candidate cannot be held
responsible (§ 57 para. 1 nr. 1, para. 3 VgV). ----------------------- Note: Weighting Best possible
rating is 10 and worst possible rating is 0; 70 % price 30 % performance criteria - Performance
criteria: 30% are scaled to 100% 1. Delivery time (60 %) - It is particularly important to the
client that the bidder specifies a delivery time that is comprehensible to the client, and that the
project planning is presented in as much detail as possible in a plausible manner. The bidder
with the shortest time is awarded the most points. 2. Maintenance (40%) - Low maintenance is
particularly important to the client. For the pneumatic valves, an additional 1 point is awarded
for overfulfilment of the specification of 50% and an additional 2 points for 100%.
----------------------- Note: Communication with Candidates Communication with Candidates
takes place via the DTVP s tender platform. Questions must be sent to FAIR via DTVP and will
are answered via DTVP. Questions posed orally or by telephone regarding the documents or
the contractual object will not be answered; answers given orally or by telephone are not
binding. ------------------------ Note: Electronic Invoicing The XInvoicing format is accepted with
additional transmission of the invoice as a -pdf-.
Rechtsgrundlage:
Richtlinie 2014/24/EU
vgv -
2.1.6. Ausschlussgründe
Rein innerstaatliche Ausschlussgründe: Please see GSI Form Suitability: self-declaration of
suitability in accordance with Sections 123, 124 GWB as part of the suitability documents
submitted by the company!
Der Zahlungsunfähigkeit vergleichbare Lage gemäß nationaler Rechtsvorschriften: Please see
GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB
as part of the suitability documents submitted by the company!
Korruption: Please see GSI Form Suitability: self-declaration of suitability in accordance with
Sections 123, 124 GWB as part of the suitability documents submitted by the company!
Beteiligung an einer kriminellen Vereinigung: Please see GSI Form Suitability: self-declaration
of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents
submitted by the company!
Vereinbarungen mit anderen Wirtschaftsteilnehmern zur Verzerrung des Wettbewerbs: Please
see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124
GWB as part of the suitability documents submitted by the company!
Verstoß gegen umweltrechtliche Verpflichtungen: Please see GSI Form Suitability: self-
declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability
documents submitted by the company!
Geldwäsche oder Terrorismusfinanzierung: Please see GSI Form Suitability: self-declaration
of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents
submitted by the company!
Betrugsbekämpfung: Please see GSI Form Suitability: self-declaration of suitability in
accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the
company!
Kinderarbeit und andere Formen des Menschenhandels: Please see GSI Form Suitability: self-
declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability
documents submitted by the company!
Zahlungsunfähigkeit: Please see GSI Form Suitability: self-declaration of suitability in
accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the
company!
Verstoß gegen arbeitsrechtliche Verpflichtungen: Please see GSI Form Suitability: self-
declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability
documents submitted by the company!
Verwaltung der Vermögenswerte durch einen Insolvenzverwalter: Please see GSI Form
Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of
the suitability documents submitted by the company!
Falsche Angaben, verweigerte Informationen, die nicht in der Lage sind, die erforderlichen
Unterlagen vorzulegen, und haben vertrauliche Informationen über dieses Verfahren erhalten.:
Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123,
124 GWB as part of the suitability documents submitted by the company!
Interessenkonflikt aufgrund seiner Teilnahme an dem Vergabeverfahren: Please see GSI
Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as
part of the suitability documents submitted by the company!
Direkte oder indirekte Beteiligung an der Vorbereitung des Vergabeverfahrens: Please see
GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB
as part of the suitability documents submitted by the company!
Schwere Verfehlung im Rahmen der beruflichen Tätigkeit: Please see GSI Form Suitability:
self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the
suitability documents submitted by the company!
Vorzeitige Beendigung, Schadensersatz oder andere vergleichbare Sanktionen: Please see
GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB
as part of the suitability documents submitted by the company!
Verstoß gegen sozialrechtliche Verpflichtungen: Please see GSI Form Suitability: self-
declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability
documents submitted by the company!
Zahlung der Sozialversicherungsbeiträge: Please see GSI Form Suitability: self-declaration of
suitability in accordance with Sections 123, 124 GWB as part of the suitability documents
submitted by the company!
Einstellung der gewerblichen Tätigkeit: Please see GSI Form Suitability: self-declaration of
suitability in accordance with Sections 123, 124 GWB as part of the suitability documents
submitted by the company!
Entrichtung von Steuern: Please see GSI Form Suitability: self-declaration of suitability in
accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the
company!
Terroristische Straftaten oder Straftaten im Zusammenhang mit terroristischen Aktivitäten:
Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123,
124 GWB as part of the suitability documents submitted by the company!
5. Los
5.1. Los: LOT-0001
Titel: Radiation hard Vacuum Valves with small conductance for SFRS
Beschreibung: 6 different type of radiation hard valves (at least 10^5Gy), with 3 different
nominal sizes, two different flange types (CF and ISO-KF) and two different actuators in total
~350pcs
Interne Kennung: 33/2600025074FAIR
5.1.1. Zweck
Art des Auftrags: Lieferungen
Haupteinstufung (cpv): 42131148 Absperrventile
5.1.2. Erfüllungsort
Postanschrift: Planckstr. 1
Stadt: Darmstadt
Postleitzahl: 64291
Land, Gliederung (NUTS): Darmstadt, Kreisfreie Stadt (DE711)
Land: Deutschland
5.1.3. Geschätzte Dauer
Laufzeit: 9 Monate
5.1.4. Verlängerung
Maximale Verlängerungen: 0
5.1.6. Allgemeine Informationen
Die Namen und beruflichen Qualifikationen des zur Auftragsausführung eingesetzten
Personals sind anzugeben: Nicht erforderlich
Auftragsvergabeprojekt nicht aus EU-Mitteln finanziert
Die Beschaffung fällt unter das Übereinkommen über das öffentliche Beschaffungswesen: ja
Diese Auftragsvergabe ist auch für kleine und mittlere Unternehmen (KMU) geeignet: nein
5.1.7. Strategische Auftragsvergabe
Ziel der strategischen Auftragsvergabe: Keine strategische Beschaffung
5.1.9. Eignungskriterien
Kriterium:
Art: Wirtschaftliche und finanzielle Leistungsfähigkeit
Bezeichnung: Wirtschaftliche und finanzielle Leistungsfähigkeit
Beschreibung: - Creditworthiness check (To be submitted with on request of contracting
authority by means of third party confirmation): Carried out by FAIR GmbH as part of the
suitability check. - Proof of compulsory commercial/professional liability insurance (request by
means of self-declaration): Information about the insurance provider and the amount of
coverage on the FAIR preprinted form On the part of FAIR here a 3-fold coverage in relation to
the order value is demanded.
Kriterium:
Art: Sonstiges
Bezeichnung: Sonstiges
Beschreibung: Supporting documents: - Russia sanctions - Declaration on Regulation (EU) 833
/2014 (To be submitted with the tender by means of self-declaration): On 08.04.2022, the
Council of the European Union adopted Regulation (EU) 2022/576 amending Regulation (EU)
No 833/2014 concerning restrictive measures in view of Russia s actions destabilising the
situation in Ukraine. This entered into force on 09.04.2022. As a regulation, it has direct legal
effect in the member states and has a direct impact on the award of public contracts and
concessions. - Sub-contractor Declaration (To be submitted with the tender by means of self-
declaration): Only to be completed if partial services are to be passed on to sub-contractors or
if the applicant/bidder is using a sub-contractor to demonstrate suitability. In this case, this
must be submitted with the request to participate/the offer. A declaration of availability (see
Declaration of Availability form) from the sub-contractor must also be submitted with the
request to participate/the offer in case of hired competence. In case of partial performance by
the sub-contractor, the declaration will be requested before the award of the contract. -
Declaration of Availability - Sub-contractor Declaration (To be submitted with the tender by
means of self-declaration): Only to be completed in parallel with the Sub-contractor
Declaration and signed by the sub-contractor if partial services are to be passed on to sub-
contractors (performance by sub-contractor) or if the applicant/bidder is using a sub-contractor
to demonstrate suitability (hired competence - see Sub-contractor form). In the event that more
than one sub-contractor is being used, several copies of this form should be filled out. One
declaration of commitment should be submitted per sub-contractor. - Further bidder
information - EU wide tendering procedures (so-called eForms) (To be submitted with the
tender by means of self-declaration): In the context of the introduction of new stipulations for
EU-wide tendering procedures (so-called eForms), public clients have been required since 25
October 2023 to publish the contractor information listed in any contract notices (previously
contract award notices).
Kriterium:
Art: Eignung zur Berufsausübung
Bezeichnung: Eignung zur Berufsausübung
Beschreibung: - Self-declaration of suitability pursuant to Sections 123, 124 GWB (To be
submitted with the participation request by means of self-declaration): Self-declaration of
possessing the knowledge pursuant to Sections 123, 124 GWB is incorrect and that the cases
mentioned therein do not apply - FAIR preprinted form - With the information asked for on the
FAIR preprinted form, the number of employees over the previous three years - on the FAIR
preprinted form under Company profile - Information on overall revenues and order-specific
revenue Declaration of the total company turnover and the turnover in relation to the particular
type of service to which the award relates, in both cases, in relation to the last 3 financial years
- on the FAIR preprinted form under Company presentation. - Act Regulating a General
Minimum Wage (Mindestlohngesetz - MiLoG) (To be submitted with the tender by means of
self-declaration): Declaration as per Section 19 (3) MiLoG - FAIR preprinted form - Declaration
of compliance with data protection requirements (To be submitted with the tender by means of
self-declaration)
Kriterium:
Art: Technische und berufliche Leistungsfähigkeit
Bezeichnung: Technische und berufliche Leistungsfähigkeit
Beschreibung: Description of reference projects: Description of three comparable reference
projects, maximum five reference projects, including the project data asked for on the FAIR
preprinted form. At least 3 relevant for track record in manufacturing of such valves and their
use in particle accelerators (in-cluding pictures).
5.1.10. Zuschlagskriterien
Kriterium:
Art: Preis
Bezeichnung: Preis
Beschreibung: Preiskriterium für Preis-Quotient-Methode
Kategorie des Gewicht-Zuschlagskriteriums: Gewichtung (Punkte, genau)
Zuschlagskriterium Zahl: 70
Kriterium:
Art: Qualität
Bezeichnung: Delivery time
Beschreibung: It is particularly important to the client that the bidder specifies a delivery time
that is comprehensible to the client, and that the project planning is presented in as much
detail as possible in a plausible manner. The bidder with the shortest time is awarded the most
points.
Kategorie des Gewicht-Zuschlagskriteriums: Gewichtung (Punkte, genau)
Zuschlagskriterium Zahl: 18
Kriterium:
Art: Qualität
Bezeichnung: Maintenance
Beschreibung: Low maintenance is particularly important to the client. For the pneumatic
valves, an additional 1 point is awarded for overfulfilment of the specification of 50% and an
additional 2 points for 100%.
Kategorie des Gewicht-Zuschlagskriteriums: Gewichtung (Punkte, genau)
Zuschlagskriterium Zahl: 12
5.1.11. Auftragsunterlagen
Sprachen, in denen die Auftragsunterlagen offiziell verfügbar sind: Englisch
Frist für die Anforderung zusätzlicher Informationen: 26/03/2025 23:59:59 (UTC+1)
Internetadresse der Auftragsunterlagen: https://www.dtvp.de/Satellite/notice
/CXS0YYEYTHAENW8E/documents
Ad-hoc-Kommunikationskanal:
URL: https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E
5.1.12. Bedingungen für die Auftragsvergabe
Bedingungen für die Einreichung:
Elektronische Einreichung: Erforderlich
Adresse für die Einreichung: https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Deutsch,
Englisch
Elektronischer Katalog: Nicht zulässig
Varianten: Nicht zulässig
Die Bieter können mehrere Angebote einreichen: Nicht zulässig
Beschreibung der finanziellen Sicherheit: Advance payments required within the realm of a
contract to be concluded (down payments) shall only be paid upon the presentation of an
unlimited suretyship with assumption by principal debtor. As a general rule, FAIR GmbH only
accepts suretyships which meet the following minimum conditions: - Guarantees with debts
owed as a principal debtor waiving the defence of §§ 770, 771 BGB - only suretyships under
German law - suretyships are irrevocable - free of charge for FAIR GmbH - issued by a
reputable international, preferably European bank - usually for an indefinite period or a period
linked to the date ownership transfer took place The suretyship can be transmitted via SWIFT.
Transmission via SWIFT is not a condition.
Frist für den Eingang der Angebote: 08/04/2025 12:00:00 (UTC+2)
Frist, bis zu der das Angebot gültig sein muss: 52 Tage
Informationen, die nach Ablauf der Einreichungsfrist ergänzt werden können:
Nach Ermessen des Käufers können alle fehlenden Bieterunterlagen nach Fristablauf
nachgereicht werden.
Zusätzliche Informationen: FAIR reserves the right to make a one-off additional request for
documents within a period to be specified in the additional request letter in accordance with §
56 VgV. However, applicants cannot rely on a subsequent request.
Informationen über die öffentliche Angebotsöffnung:
Eröffnungsdatum: 08/04/2025 12:00:00 (UTC+2)
Auftragsbedingungen:
Die Auftragsausführung muss im Rahmen von Programmen für geschützte
Beschäftigungsverhältnisse erfolgen: Nein
Bedingungen für die Ausführung des Auftrags: BGB company with joint and several liability
with listing of all members and their authorised representatives incl. naming of an authorised
representative who shall represent the consortium in a legally binding manner vis-à-vis the
Contracting authority. The tender must be accompanied by a legally binding declaration signed
by all joint members that the lead firm, as authorised representative, represents the joint
members listed before the Contracting authority and is jointly and severally liable, having an
effect on each member, for performing the service in accordance with the contract.
Elektronische Rechnungsstellung: Erforderlich
Aufträge werden elektronisch erteilt: ja
Zahlungen werden elektronisch geleistet: ja
Von einer Bietergemeinschaft, die den Zuschlag erhält, anzunehmende Rechtsform: BGB
company with joint and several liability with listing of all members and their authorised
representatives incl. naming of an authorised representative who shall represent the
consortium in a legally binding manner vis-à-vis the Contracting authority. The tender must be
accompanied by a legally binding declaration signed by all joint members that the lead firm, as
authorised representative, represents the joint members listed before the Contracting authority
and is jointly and severally liable, having an effect on each member, for performing the service
in accordance with the contract.
5.1.15. Techniken
Rahmenvereinbarung: Keine Rahmenvereinbarung
Informationen über das dynamische Beschaffungssystem:
Kein dynamisches Beschaffungssystem
Elektronische Auktion: nein
5.1.16. Weitere Informationen, Schlichtung und Nachprüfung
Überprüfungsstelle: Vergabekammer des Bundes
Informationen über die Überprüfungsfristen: The competent investigating authority is as
follows Vergabekammer des Bundes Villemombler Str. 76 D-53123 Bonn, Germany Tel.: 0228
9499-0 Fax: 0228 9499-163 Email: vk@bundeskartellamt.bund.de Web: http://www.
bundeskartellamt.de/SharedDocs/Kontaktdaten/DE/Vergabekammern.html Candidate/ Bidder
is requested to clearly identify those sections of the tender that contain a trade or business
secret. If Bidder fails to do so, the Public Pro-curement Tribunal may, in the case of a review
procedure, assume that Bidder has agreed to have these documents inspected (§165 para. 3
GWB). As Awarding Authority, FAIR is obliged to make the tender file available to the Public
Procure-ment Tribunal immediately when initiating a review procedure (§ 163 para. 2 cl. 3
GWB). Candidates/ Bidders have a right to expect the contracting authority s compliance with
the Bidder-protecting provisions re: the tender procedure (§ 97 para. 6 GWB). If Candidate/
Bidder interested in the contract considers that Bidder s rights have been infringed through
failure to comply with award regulations, the infringement must be reported to FAIR within ten
calendar days (§ 160 para. 3 cl. 1 no. 1 GWB). Infringements identifiable on the basis of the
announcement or the award doc-uments must be asserted against FAIR within the deadline
for submission of ten-ders specified in the announcement (§ 160 para. 3 cl. 1 nr. 2 - 3 GWB). If
FAIR informs Candidate/ Bidder that FAIR is unwilling to redress its complaint, it is possible to
file an appeal for review with the aforementioned Public Procure-ment Tribunal within 15 days
of receipt of the notification (§ 160 para. 3 cl. 1 no. 4 GWB). Bidders whose tenders are not to
be considered for the award will be informed prior to the award according to § 134 GWB. A
contract may only be concluded 15 calendar days after this information has been sent by
FAIR. In the case of trans-mission by fax or electronic means, this period shall be ten calendar
days. It commences on the day after dispatch of the information by FAIR. After this peri-od has
expired, a surcharge is possible, even if the deadline is not passed accord-ing to § 160 para. 3
GWB. An application for review would therefore have to be delivered to FAIR by the Public
Procurement Tribunal before the expiry of the deadline according to § 134 GWB in order to
prevent a surcharge. According to § 135 para. 1 and 2 GWB, the ineffectiveness of a
commission can only be established if it has been asserted in the review procedure within 30
cal-endar days of the conclusion of the contract but not later than six months after the
conclusion of the contract. If the contracting entity has published the award in Amtsblatt der
Europäischen Union [transl.: Official Journal of the European Union], the period
unenforceability shall end 30 calendar days after announce-ment of the publication of the
award in the Amtsblatt der Europäischen Union. Information pursuant to Art. 13 GDPR on the
processing of your personal data within the scope of our business relationship is available at:
www.gsi.de/data-protection FAIR - Facility for Antiproton and Ion Research in Europe GmbH
Organisation, die zusätzliche Informationen über das Vergabeverfahren bereitstellt: FAIR -
Facility for Antiproton and Ion Research in Europe GmbH
Organisation, die weitere Informationen für die Nachprüfungsverfahren bereitstellt:
Vergabekammer des Bundes
Organisation, die Teilnahmeanträge entgegennimmt: FAIR - Facility for Antiproton and Ion
Research in Europe GmbH
TED eSender: Datenservice Öffentlicher Einkauf (in Verantwortung des Beschaffungsamts
des BMI)
8. Organisationen
8.1. ORG-0001
Offizielle Bezeichnung: FAIR - Facility for Antiproton and Ion Research in Europe GmbH
Registrierungsnummer: DE 275 595 927
Postanschrift: Planckstr. 1
Stadt: Darmstadt
Postleitzahl: 64291
Land, Gliederung (NUTS): Darmstadt, Kreisfreie Stadt (DE711)
Land: Deutschland
E-Mail: proekf33@gsi.de
Telefon: +49 6159 711987
Rollen dieser Organisation:
Beschaffer
Organisation, die zusätzliche Informationen über das Vergabeverfahren bereitstellt
Organisation, die Teilnahmeanträge entgegennimmt
8.1. ORG-0002
Offizielle Bezeichnung: Vergabekammer des Bundes
Registrierungsnummer: 022894990
Postanschrift: Villemomblerstr. 76
Stadt: Bonn
Postleitzahl: 53123
Land, Gliederung (NUTS): Bonn, Kreisfreie Stadt (DEA22)
Land: Deutschland
Kontaktperson: Vergabekammer des Bundes
E-Mail: vk@bundeskartellamt.bund.de
Telefon: +49 22894990
Rollen dieser Organisation:
Überprüfungsstelle
Organisation, die weitere Informationen für die Nachprüfungsverfahren bereitstellt
8.1. ORG-0003
Offizielle Bezeichnung: Datenservice Öffentlicher Einkauf (in Verantwortung des
Beschaffungsamts des BMI)
Registrierungsnummer: 0204:994-DOEVD-83
Stadt: Bonn
Postleitzahl: 53119
Land, Gliederung (NUTS): Bonn, Kreisfreie Stadt (DEA22)
Land: Deutschland
E-Mail: noreply.esender_hub@bescha.bund.de
Telefon: +49228996100
Rollen dieser Organisation:
TED eSender
Informationen zur Bekanntmachung
Kennung/Fassung der Bekanntmachung: 169be916-ab6c-4dbe-91e1-9d65226f78d4 - 01
Formulartyp: Wettbewerb
Art der Bekanntmachung: Auftrags- oder Konzessionsbekanntmachung Standardregelung
Unterart der Bekanntmachung: 16
Datum der Übermittlung der Bekanntmachung: 06/03/2025 13:00:21 (UTC+1)
Sprachen, in denen diese Bekanntmachung offiziell verfügbar ist: Englisch
ABl. S Nummer der Ausgabe: 47/2025
Datum der Veröffentlichung: 07/03/2025
Referenzen:
https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E
https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E/documents
http://icc-hofmann.net/NewsTicker/202503/ausschreibung-149507-2025-DEU.txt
--------------------------------------------------------------------------------
Database Operation & Alert Service (icc-hofmann) for:
The Office for Official Publications of the European Communities
The Federal Office of Foreign Trade Information
Phone: +49 6082-910101, Fax: +49 6082-910200, URL: http://www.icc-hofmann.de
